Honda Timing Belt Replacement Utah: GT Automotive

GT Auto’s Timing Belt Service: The Most Value For Your Labor Dollar

GT Automotive gives you the most value for your Honda auto repair dollar. When it comes to Honda timing belt replacement in Salt Lake City, we maximize your auto repair investment of labor costs. In a Honda timing belt service, for example, we will save you on total labor costs that involve items like the water pump, front engine seals, drive belt, idlers, and tensioners, along with the timing belt. Seth at GT Automotive in South Jordan, Utah shares in this Honda car repair video the value we deliver in your Honda timing belt repair.

Many Honda engines are interference engines. They do this because they are looking to get a little more performance out of their high compression, small engine design.

In an interference engine the valve opens further into the combustion chamber than a non-interference engine. So, if the timing belt breaks (because of age, or due to the water pump or some other component failure), both the piston (and the valve it strikes), can and will be damaged.
Damage of this nature will result in either major and costly repair, or (worst case) a complete engine replacement.

honda-timing-belt-service

A malfunctioning water pump can cause the belt to break, which can cause the piston to strike and damage the valve, which results in major engine repair and major dollar signs.

Since the water pump is driven by the timing belt, if you don’t replace the pump now, and if it starts leaking later, you will wind up paying essentially the same labor costs later that you are paying now for timing belt replacement. By getting the water pump replaced at the same time as the timing belt, you will pay little labor cost for the water pump’s replacement.

It is a wise decision not to gamble on a worn out water pump. Just get that water pump replacement done at the same time.

You save on total labor costs of both timing belt and water pump. Remember, the water pump is already removed to replace the timing belt.  So you save on total costs there.

The same principle applies to the cam, crank seals, and belt idler pulleys on the Honda.

We check your motor mounts during timing belt replacement, since they are easily visible and can be serviced and/or replaced if necessary. That way, we maximize the value of labor costs during Honda timing belt replacement service.

GT Automotive can replace your Honda timing belt at the factory recommended mileage intervals. This simple procedure will help to prevent premature engine failure and costly repairs, and can help to ensure that your engine is running efficiently and quietly for a long time.

Call 801.302.0912 for Honda service and repair in Salt Lake City from our factory trained Honda and Acura technicians-our Honda techs have over 37 combined years of Honda auto repair expertise.

Since 1980, GT Automotive and our ASE certified and factory trained Honda and Acura technicians have been serving Honda car owners in the Salt Lake Valley for all their vehicle repair needs. Call us today, 801-302-0912, about servicing and repairing your Honda or Acura in Salt Lake City.

Auto Repair Sandy

GT Automotive-Your Trusted Honda Auto Repair Shop

Honda Timing Belt Replacement Salt Lake City: GT Automotive

Honda Timing Belt Service Salt Lake City

GT Automotive recommends regular Honda timing belt replacement for your Civic, Accord, Element, CR-V, Pilot, Odyssey-any Honda car, crossover or SUV. The importance of regularly replacing Honda timing belts needs to be emphasized, because it can directly affect the performance and life of your engine.  Kyle at GT Automotive in South Jordan, Utah shares in this Honda timing belt replacement video the importance of scheduled replacement of your Honda timing belt.

Keeping your Honda well maintained should keep it performing for 250,000-300,000 miles or more. We have many customers who drive Hondas with that much mileage, who will testify to that fact.

The key to keeping your Honda in great condition is regularly scheduled Honda maintenance. Regularly scheduled maintenance pin-points, services, replaces and adjusts key parts of your Honda engine. Honda engineers know in advance these services are required. This is especially important with the timing belt.

(If you are looking to buy a used Honda that is approaching 100,000 miles, or if the Honda is approaching 7 years old, one of the first questions you must ask is; “When was the timing belt replaced?” Ask for proof.)

honda-timing-belt

What Honda Timing Belts Do:

  • The timing belt keeps your car’s crankshaft and camshaft valves opening and shutting in sync with the pistons.
  • It controls the rotation of the camshaft and crankshaft and the opening and closing of the engine’s many valves to allow air and gas in and out, which causes the fuel to ignite in the combustion chamber.
  • During this explosion, the valves push the pistons down.
  • In order for the process to take place, the valves have to open and close at the right time.
  • The valves have to be in the correct position as well as the pistons.
  • The valves open at different times for each cylinder.
  • When the timing belt breaks, the valves, which are very light, will open at the wrong time and hit the larger pistons and cause damage
  • Checking and replacing the belt regularly prevents breakage and serious engine damage and helps you avoid getting stranded on the highway.
  • Timing belts with cracked and/or missing teeth can cause your Honda to idle rough, become sluggish, suffer engine clattering or backfiring.
  • If your Honda timing belt breaks, your engine fails, causing your car to shut down.
  • Because most Hondas are interference engines, having a timing belt break while driving will probably cause the pistons to bend the valves, due to their colliding without the clearance provided by the timing belt movement.
  • Unfortunately, in most cases, there are no obvious signs the timing belt is near the breaking point-it will just break.
  • Changing a timing belt on a Honda Civic, Accord, CR-V, Odyssey, Pilot, Element, before it wears out is critical.
  • Damage will occur if the timing belt wears down enough to break while the car is running.
  • Honda recommends the timing belt to be changed every 105,000 miles. But, it’s a good idea to change the timing belt before the car reaches 105,000 miles, because of the potential major engine damage that can result from a broken Honda timing belt.

 

GT Automotive can replace your Honda timing belt at the factory recommended mileage intervals. This procedure will help to prevent premature engine failure and costly repairs, and can help to ensure that your engine is running efficiently and quietly for a long time.

Call 801.302.0912 for Honda service and repair in Salt Lake City from our factory trained Honda and Acura technicians-our Honda techs have over 37 combined years of Honda auto repair expertise.

Since 1980, GT Automotive and our ASE certified and factory trained Honda and Acura technicians have been serving Honda car owners in the Salt Lake Valley for all their vehicle repair needs. Call us today, 801-302-0912, about servicing and repairing your Honda or Acura in Salt Lake City.

Honda Repair Salt Lake City

Maintain your Honda car with regular maintenance at GT Automotive

Subaru Car Repair Salt Lake City: Subaru Timing Belt Replacement

Could Your Subaru Need a Timing Belt Replacement?

Need Subaru car repair in Salt Lake City? You are driving for a while and the car just “shuts off”. The lights on your instrument panel come on, but your engine just “turns over” and does not start. If your Subaru has 80,000 miles, 90,000 miles or more, the cause of your breakdown could very well be your timing belt has broken. Tim Stapleton, owner of GT Automotive in South Jordan, Utah, explains in this Subaru car repair video a common Subaru car repair-timing belt replacement.

Subaru Timing belts are crucial to the proper functioning of engines that use cams to operate cylinder valves.

  • Subaru’s overhead cam engine was introduced in the late 1980’s, and is still used today. These engines proved much quieter, replacing Subaru’s earlier push-rod engines-they used a chain and sprockets to rotate the camshaft.
  • These new overhead cam engines were operated through a timing belt. As opposed to anoisy chain, these timing belts were made of reinforced rubber, with fiberglass strands for strength and resistance to stretching.
  • Although much quieter than a chain and sprockets, the timing belt needs to changed periodically.
  • The timing belt should be changed every 90,000-105,000 miles, according to Subaru’s maintenance schedule.

Subaru Timing Belts:

  • Turn the engine’s camshaft, which helps open and close the cylinder valves. These valves bring air and fuel into the cylinder heads, and move exhaust gases out.
  • Also drive the water pump.
  • Do not require lubrication, compared to timing chains and gears.
  • While quieter, less expensive, and more efficient, need to be replaced more often.
  • Break more easily than gears and chains.
  • Need to be replaced BEFORE they break.
  • When broken, can damage your engine, and may cause your engine to suddenly stop running without warning.

GT Automotive has certified Subaru mechanics to service and repair your Subaru vehicle.

GT Automotive also has certified technicians specializing in Honda, Toyota, Lexus, Audi and VW. We also service and repair all domestic and import model cars and trucks. Complete auto repair services from engine overhauls and rebuilds to clutches, brakes, fast oil changes, State Safety Inspections, Emissions Tests and “On-The-Spot” DMV Tag Renewals. Call us at 801-302-0912, or visit us online atwww.GTAutomotive.com.

Subaru Repair Sandy

Earning Your Trust Since 1980

Subaru Repair Salt Lake City: 5 Most Common Subaru Repair Problems

Want to know about the common Subaru auto repair problems you may encounter? Tim explains in this Subaru repair video what the 5 most common Subaru repair problems are.

1. Subaru Head Gasket Repairs. The head gasket leaking externally have always been a Subaru repair issue. It i such a common repair that aftermarket Subaru head gaskets are designed better than the original head gaskets.

2. Subaru Double Offset Joint repair (DOJ repair). The protective boot and the DOJ joint are positioned close to the catalytic converter. The heat from the converter tends to dry out and crack the protective boot. This causes the lubricant and grease inside the joint to also dry up, causing the joint to bind up and break.

3. Tires and Brakes wear out faster. Since Subaru is an All Wheel Drive (AWD) vehicle, the tires and brakes operate as if the vehicle is always in 4 wheel drive. Sharp turns at slow speeds and frequent braking-common to city traffic driving-put an extra strain on your tires and brake system.

4. Timing Belt Replacement. Depending upon your specific make and model year of your Subaru, the timing belt needs to be replaced anywhere between 90,000 and 105,000 miles.
Because the timing belt is:

  • Hidden from your view;
  • Such a long length belt;
  • Operates critical components inside your engine-valves, camshaft, etc.;
  • Also operates your water pump…

…it is critical that your Subaru timing belt be replaced BEFORE it breaks.

5. Spark Plugs (also known as a common tune-up). Subaru spark plugs are hidden away, below your view, and are difficult to access. Spark plugs are scheduled for replacement every 90,000-100,000 miles. But your spark plugs may wear out sooner than scheduled, lowering your gas mileage and engine performance.

Tim invites you to call GT Automotive to discuss your Subaru car repair problems. We have certified, factory trained and experienced Subaru technicians to solve your auto repair problems.

GT Automotive also has certified technicians specializing in Honda, Toyota, Lexus, Audi and VW. We also service and repair all domestic and import model cars and trucks. Complete auto repair services from engine overhauls and rebuilds to clutches, brakes, fast oil changes, State Safety Inspections, Emissions Tests and “On-The-Spot” DMV Tag Renewals. Call us at 801-302-0912, or visit us online at www.GTAutomotive.com.

Subaru Repair Salt Lake City,Subaru Auto Repair Salt Lake City

GT Automotive in South Jordan-Your Subaru Auto Repair Center